Timeless, the Eglantine pool fence blends easily into your pool thanks to its sober shapes.Eglantine, a great classic in our bar range

DESCRIPTION :

• Guardrail fixed to 2 aluminum rails, top and bottom.
• Standard-compliant aluminum balusters.
• Exterior-treated, polyester-coated aluminum.
• Standard height 1.20 m for panels with maximum 1.8 m between posts.
• By sealed post or embedded directly in a concrete block.
  - By means of a 2-point fixing shoe, secured by 12 mm diameter bolts with conical or chemical expansion plugs, for a concrete slab.
  
  Finish:
  - As standard, structure in RAL 9010 or RAL according to available colors.
  -Two post ends are available: "ball finish" or "flat aluminum".
  
  
  TECHNICAL INFORMATION
  
  Cladding
  Aluminum cladding for pool fences, model Eglantine - Orial.
  Finish: white lacquered aluminum with surface pre-treatment, in compliance with Qualicoatstandards. A4 stainless steel screws.
  Dimensions: Various panel sizes are available: 0.9 m - 1.2 m - 1.5 m - 1.8 m panels. Center-to-center distance between posts.
  Panel height: 1ml2 between 2 support points, i.e. 1.22 m from the ground.
  Panels designed and manufactured in compliance with NF P90-306 swimming pool barrier standard, with 20 mm diameter tubing. Spacing between bars: 10 cm.
  
  WALLET
  Aluminum wicket gate for swimming pool fences - Orial
  Finish: white-lacquered aluminum with surface pre-treatment in compliance with Qualicoatstandards . A4 stainless steel screws.
  Wicket gate dimensions: 0.9 m to centerline of posts. Height to match liner.
  The gate opens towards the outside of the pool and is unlocked by 2 consecutive or simultaneousactions (child safety lock).
  The automatic gate is optional for strictly private use (no rental).
  
  POST
  Aluminum post for Eglantine - Orial pool fence
  Finish: white lacquered aluminum with surface pre-treatment in compliance with Qualicoat standards. A4 stainless steel screws.
  Post height: 1.25 m from ground level. Posts supplied in 30 cm increments for embedding in a concrete block.
  Easy to install thanks to 2 points for fixing the adjustable shoe. Allows you to compensate for minor ground level irregularities.
  Posts finished with either a plug or ball head.
  
  ACCESSORIES
  Set of 2 finishing rings
  Finish: white lacquered aluminum with pre-treatment to Qualicoat standards. A4 stainless steel screws.
  Post rings. For use on posts where the cladding is fixed on one side only, to improve aesthetics where necessary, depending on site configuration.

This barrier is not a substitute for common sense or individual responsibility.
Nor is it intended to replace the vigilance of parents and/or responsible adults, who remain the essential factor in protecting children under 5.
Under no circumstances can your dealer or the manufacturer of this barrier be held responsible for the fall or drowning of any person or animal.
The installation of your barrier must in no way reduce your vigilance or replace active surveillance of the pool and its surroundings.